twitter facebook stumble upon rss

12 Hidden Playground Dangers Every Parent Should Look Out For

sign up for the momlogic newsletter Tweet This

More than 200,000 kids a year are injured on playgrounds. The National Playground Safety Institute has developed a list of 12 "dirty dozen" hazards that parents should look out for:

dangerous slide

1) Improper Protective Surfacing
The surface or ground under and around the playground equipment should be soft enough to cushion a fall. Improper surfacing material under playground equipment is the leading cause of playground-related injuries. Over 70 percent of all accidents on playgrounds are due to children falling. Hard surfaces such as concrete, blacktop and packed earth or grass are not acceptable under play equipment. A fall onto one of these hard surfaces could be life-threatening.

There are many surfaces that offer protection from falls. Acceptable surfaces include hardwood fiber/mulch, sand and pea gravel. These surfaces must be maintained at a depth of 12 inches, be free of standing water and debris and not be allowed to become compacted. There are also synthetic or rubber tiles and mats that are appropriate for use under play equipment.

2) Inadequate Fall Zone
The fall zone or use zone is the area under and around the playground equipment where a child might fall. A fall zone should be covered with protective surfacing material and extend a minimum of six feet in all directions from the edge of stationary play equipment such as climbers and chin-up bars. The fall zone at the bottom or exit area of a slide should extend a minimum of six feet from the end of the slide for slides four feet or less in height. For slides higher than four feet, take the entrance height of the slide and add four feet to determine how far the surfacing should extend from the end of the slide. Swings require a much greater area for the fall zone: The fall zone should extend two times the height of the pivot or swing hanger in front of and behind the swing's seats. The fall zone should also extend six feet to the side of the support structure.

3) Protrusion and Entanglement Hazards
A protrusion hazard is a component or piece of hardware that might be capable of impaling or cutting a child if a child should fall against the hazard. Some protrusions are also capable of catching strings or items of clothing which might be worn around a child's neck. This type of entanglement is especially hazardous, because it might result in strangulation. Examples of protrusion and entanglement hazards include bolt ends that extend more than two threads beyond the face of the nut, hardware configurations that form a hook or leave a gap or space between components and open "S"-type hooks. Rungs or handholds that protrude outward from a support structure may be capable of penetrating the eye socket. Special attention should be paid to the area at the top of slides and sliding devices. Ropes should be anchored securely at both ends and not be capable of forming a loop or a noose.

4) Entrapment in Openings
Enclosed openings on playground equipment must be checked for head-entrapment hazards. Children often enter openings feetfirst and attempt to slide through the opening. If the opening is not large enough, it may allow the body to pass through the opening and entrap the head. Generally, there should be no playground-equipment openings that measure between three and one half inches and nine inches. Where the ground forms the lower boundary of the opening is not considered to be hazardous. Pay special attention to openings at the top of a slide, openings between platforms and openings on climbers where the distance between rungs might be less than nine inches.

5) Insufficient Equipment Spacing
Improper spacing between pieces of play equipment can cause overcrowding of a play area, which may create several hazards. Fall zones for equipment that is higher than 24 inches above the ground cannot overlap. Therefore, there should be a minimum of 12 feet in between two play structures. This provides room for children to circulate and prevents the possibility of a child falling off one structure and striking another structure. Swings and other pieces of moving equipment should be located in an area away from other structures.

6) Trip Hazards
Trip hazards are created by play-structure components or items on the playground. Exposed concrete footings, abrupt changes in surface elevations, containment borders, tree roots, tree stumps and rocks are all trip hazards that are commonly found in play environments.

7) Lack of Supervision
The supervision of a playground environment directly relates to the overall safety of the environment. A play area should be designed so that it is easy for a parent or caregiver to observe the children at play. Young children are constantly challenging their own abilities, very often not being able to recognize potential hazards. It is estimated that over 40 percent of all playground injuries are directly related to lack of supervision in some way. Parents must supervise their children in some way on the playground!

8) Age-Inappropriate Activities
Children's developmental needs vary greatly from age 2 to age 12. In an effort to provide a challenging and safe play environment for all ages, it is important to make sure that the equipment in the playground setting is appropriate for the age of the intended user. Areas for preschool-age children should be separate from areas intended for school-age children.

9) Lack of Maintenance
For playgrounds to remain in "safe" condition, a program of systematic, preventive maintenance must be present. There should be no missing, broken or worn-out components. All hardware should be secure. The wood, metal or plastic should not show signs of fatigue or deterioration. All parts should be stable with no apparent signs of loosening. The surfacing material must also be maintained. Check for signs of vandalism.

10) Pinch, Crush, Shearing and Sharp-Edge Hazards
Components in the play environment should be inspected to make sure there are no sharp edges or points that could cut skin. Moving components such as suspension bridges, track rides, merry-go-rounds, seesaws and some swings should be checked to make sure that there are no moving parts or mechanisms that might crush or pinch a child's finger.

11) Platforms with No Guardrails
Elevated surfaces such as platforms, ramps and bridgeways should have guardrails that prevent accidental falls. Preschool-age children are more at risk from falls, and equipment intended for this age group should have guardrails on all elevated surfaces higher than 20 inches. Equipment intended for school-age children should have guardrails on elevated surfaces higher than 30 inches.

12) Equipment Not Recommended for Public Playgrounds
Accidents associated with the following types of equipment have resulted in the Consumer Product Safety Commission recommending that they not be used on public playgrounds:

  • Heavy swings such as animal-figure swings and multiple-occupancy/glider-type swings.
  • Free-swinging ropes that may fray or form a loop.
  • Swinging exercise rings and trapeze bars. These are considered athletic equipment and are not recommended for public playgrounds. Overhead hanging rings that have a short amount of chain and are intended for use as a ring trek (generally four to eight rings) are allowed on public playground equipment.

next: Teens With Warm, Watchful Parents Booze Less
3 comments so far | Post a comment now
Sara June 26, 2010, 9:18 AM

Rocks, I agree we should ban rocks

Samantha  June 26, 2010, 9:35 AM

i think that the heat of the playground equipment should aslo be mentioned.
children get burned all the time on playground slides that have been sitting in the sun.

these slides, depending on whether they are metal or plastic, can attain temperatures up to 185 degrees.

Secret Mommy June 26, 2010, 11:33 PM

Kudos Sara! I wondered if I was the only one who noticed that this list basically listed grass and tree roots in a couple places as hazards. For Pete’s sake…

Back to top >>